E1 - Bundle of Adventure - Size and Details
| Designed with gratitude by thatgamecompany | ||
| Package dimensions: 240mm × 145mm × 135mm | ||
| Box of Courage includes: | ||
| 1 × Enchantment Play Fight Pins (2 pc) | ||
| Product size | Left: 37mm × 30mm × 2mm Right: 38mm × 28mm × 2mm |
|
| Main materials | Zinc alloy | |
| Finish | Hard enamel | |
| Total weight | 15.4g | |
| 1 × Dark Dragon Pin | ||
| Product size | 45mm × 6mm | |
| Main materials | Zinc alloy, thermochromic paint, pearl paint | |
| Finish | Hard enamel with varnish | |
| Product weight | 45.5g | |
| Instructions | Thermochromic feature: The Dark Dragon's eye located in the center of the pin contains thermochromic materials with a threshold temperature around 82.4°F (28°C) that can be triggered using body temperature. It may take longer to initiate the effect when the room temperature is low or the pin is still cold to the touch. Please do not use a direct flame, microwave, oven, or any hot objects on the pin to avoid damage. |
|
| 1 × Dark Dragon Bucket Hat | ||
| Product size | One-size, fits head size: 21.5 in. - 22.5 in. (55.5cm - 57.5cm) | |
| Main materials | 100% Cotton | |
| Color | Black | |
| 3 × Recharge Socks (pair) | ||
| Product size | 170mm × 80mm one-size | |
| Main materials | 60% Cotton 20% Nylon 10% Polyester 10% Spandex |
|
| Color | White, gray, black | |
| Sky Patch | ||
| Product size | 75mm × 67mm (Hand-made patches, please allow slight differences in size.) |
|
| Main materials | Polyester, adhesive | |
| Care instructions | Please note that rubbing during wearing and leaving damp in water or sweat may cause the color to stain. Use mild detergents only, do not bleach. Do not leave under running water for an extended amount of time. Do not tumble dry. Shape before line dry. Do not iron decorations. Extended use under sunlight while damp may cause discoloration. Wash immediately after use, line dry in the shade. |
|
| Application instructions | 1. Place the patch onto the desired area of a garment - pre-heat iron to 350F. Press the iron on top of the patch for 5 seconds and then on top of the fabric under the patch for 25 seconds. Set aside to cool and set. 2. Recommended step: place a light-colored cloth on top of the patch when pressing to prevent damage to the patch 3. Sew a few stitches around the edge of the patch after ironing to strengthen the bond. 4. The iron-on method is recommended for cotton/linen fabric. Sew on the patches for sweaters/faux leather/lace garments instead. *Please follow the instructions for application, and be careful of the iron's high temperature. |
|
| Package dimensions: 108mm × 100mm (subject to slight adjustment) | ||
| Designed with gratitude by thatgamecompany | ||
| Scout Horn Pin | ||
| Product size | 47.5mm × 24mm × 2mm | |
| Main materials | Zinc alloy, glitter | |
| Finish | Hard enamel | |
| Product weight | 8.7g | |
| Package dimensions: 100mm × 100mm × 25mm | ||
| Designed with gratitude by thatgamecompany | ||
| Forgotten Ark Pin | ||
| Product size | 34.5mm × 32mm × 2mm | |
| Main materials | Zinc alloy, glitter | |
| Finish | Hard enamel with varnish | |
| Product weight | 11.3g | |
| Package dimensions: 100mm × 100mm × 25mm | ||
| Designed with gratitude by thatgamecompany | ||
| Enchantment Alchemist Cape Pin | ||
| Product size | 36mm × 25mm × 2mm | |
| Main materials | Zinc alloy, luminous powder | |
| Finish | Hard enamel | |
| Product weight | ≈11.2g | |
| Package dimensions: 100mm × 100mm × 25mm | ||
| Designed with gratitude by thatgamecompany | ||
| Elder of the Wasteland Pin | ||
| Product size | 34mm × 33mm × 2mm | |
| Main materials | Zinc alloy, luminous powder | |
| Finish | Hard enamel | |
| Product weight | 11.5g | |
| Package dimensions: 100mm × 100mm × 25mm | ||
| Designed with gratitude by thatgamecompany | ||